10101 - METHANOL Incline Shreadstack for Stock HPI Filter W/ConePrecio habitual $39.00
Los gastos de envío se calculan en la pantalla de pagos.
<p>We've designed this stack so that you can run methanol through a standard gas carb such as a WT-990. The bore has been reduced to the same venturi size as the wt-499 methanol carb of 11.11mm. Keep in mind if plan to run methanol there's more to it then just installing this vstack. </p> <p>The angled shreadstack was designed by Rodney Shreadhead Ketchem to replace the stock plastic HPI Baja 5B/SS/5T filter base. The angled shreadstack will angle your filter above the gas tank for easy install and removal. The shreadstack is more reliable then the stock filter base and the built in v-stack will give you motor a little more power. This stack allows for a higher torque on the carb bolts for better gasket sealing. This is a billet stack so the higher torque on the carb bolts will not bend or warp this stack. This stack requires all of your stock HPI filter components except for the base. </p>